iPod classic
Belkin Remix Metal for iPod nano 4G & iPod classic
CaseandCover.com reviews Belkin cases and covers for the iPhone, iPod, and BlackBerry. Trusted reviews, from trusted sources throughout the internet.
For iPod classic
For iPod nano 4G
Company: Belkin
Model: Remix Metal
Price: $25-30
Compatible: iPod nano (4G), iPod classic (120GB)
Staggering is the only word we'd use to describe the number of hard plastic iPod and iPhone cases we're reviewing today -- over 20 different models that we've been comparing to one another, as well as past cases, over the last few weeks. To help you sort through all the options, we've assembled a few statistics that are worth knowing up front. All of the iPod nano cases in this roundup run from $20 to $30, with most at $25 or less, while the two iPod classic cases sell for $25 to $30, iPod touch cases range from $20 to $30, and iPhone 3G cases go for $20 to $35. Virtually every case offers at least partial back and side protection, but they vary widely in front, top, and bottom coverage. Though all use plastic as their base material, they differ considerably in color options and secondary materials. This review covers Belkin's Remix Metal cases for the fourth-generation nano ($25) and 120GB iPod classic ($30).
Based on earlier Remix Metal cases released for the third-generation iPod nano and original iPod classic, Belkin’s new versions continue the past trend: the back and sides of each case are a formed piece of completely clear hard plastic, while the front shell features interesting metal front colors and designs, fused onto an otherwise clear plastic faceplate. Multiple colors are available for each model.
The good news about both of these cases is that—unlike most of the cases we review today—they actually include integrated Click Wheel covers in addition to their hard plastic screen protectors. We had no issues seeing the iPods’ screens or using their controls while inside. Belkin includes holes for the headphone and Dock Connector ports, both compatible with oversized headphone plugs—the classic one just barely OK for the biggest ones—and Universal Docks. We really, truly love the way these cases look; Belkin’s choice of metals and integration of clear plastics on the front is a dynamite combination. The company has also removed the ink dots that were previously on the Click Wheel of last year’s classic version, which we think is an improvement.
Here’s the bad news. While the iPod classic version is every bit as good as last year’s, and still comes with shells for both thinner 80/120GB iPod classics and now-discontinued 160GB models, the iPod nano version we received had serious fit problems. It didn’t seem sturdy at all, and repeatedly came apart at the side seams, an issue that previously affected one of the company’s clear plastic iPhone cases, but in our experience not to the extent of this one.
Though we’d rely upon the iPod classic one in a heartbeat, and continue to feel that it’s worthy of our high recommendation, the iPod nano 4G version we tested was a dud, and definitely needs to be redesigned for greater stability. Our expectation is that Belkin will do this soon, if it hasn’t already started the process.
By Jeremy Horwitz
Editor-in-Chief, iLounge Published: Wednesday, October 22, 2008
For iPod classic
For iPod nano 4G Company: Belkin
Model: Remix Metal
Price: $25-30
Compatible: iPod nano (4G), iPod classic (120GB)
Staggering is the only word we'd use to describe the number of hard plastic iPod and iPhone cases we're reviewing today -- over 20 different models that we've been comparing to one another, as well as past cases, over the last few weeks. To help you sort through all the options, we've assembled a few statistics that are worth knowing up front. All of the iPod nano cases in this roundup run from $20 to $30, with most at $25 or less, while the two iPod classic cases sell for $25 to $30, iPod touch cases range from $20 to $30, and iPhone 3G cases go for $20 to $35. Virtually every case offers at least partial back and side protection, but they vary widely in front, top, and bottom coverage. Though all use plastic as their base material, they differ considerably in color options and secondary materials. This review covers Belkin's Remix Metal cases for the fourth-generation nano ($25) and 120GB iPod classic ($30).
Based on earlier Remix Metal cases released for the third-generation iPod nano and original iPod classic, Belkin’s new versions continue the past trend: the back and sides of each case are a formed piece of completely clear hard plastic, while the front shell features interesting metal front colors and designs, fused onto an otherwise clear plastic faceplate. Multiple colors are available for each model.
The good news about both of these cases is that—unlike most of the cases we review today—they actually include integrated Click Wheel covers in addition to their hard plastic screen protectors. We had no issues seeing the iPods’ screens or using their controls while inside. Belkin includes holes for the headphone and Dock Connector ports, both compatible with oversized headphone plugs—the classic one just barely OK for the biggest ones—and Universal Docks. We really, truly love the way these cases look; Belkin’s choice of metals and integration of clear plastics on the front is a dynamite combination. The company has also removed the ink dots that were previously on the Click Wheel of last year’s classic version, which we think is an improvement.
Here’s the bad news. While the iPod classic version is every bit as good as last year’s, and still comes with shells for both thinner 80/120GB iPod classics and now-discontinued 160GB models, the iPod nano version we received had serious fit problems. It didn’t seem sturdy at all, and repeatedly came apart at the side seams, an issue that previously affected one of the company’s clear plastic iPhone cases, but in our experience not to the extent of this one.
Though we’d rely upon the iPod classic one in a heartbeat, and continue to feel that it’s worthy of our high recommendation, the iPod nano 4G version we tested was a dud, and definitely needs to be redesigned for greater stability. Our expectation is that Belkin will do this soon, if it hasn’t already started the process.
By Jeremy Horwitz
Editor-in-Chief, iLounge Published: Wednesday, October 22, 2008
Griffin Wave Case for iPod nano 4G and classic 120GB
CaseandCover.com reviews Griffin cases and covers for the iPhone, iPod, and BlackBerry. Trusted reviews, from trusted sources throughout the internet.
Staggering is the only word we'd use to describe the number of hard plastic iPod and iPhone cases we're reviewing today -- over 20 different models that we've been comparing to one another, as well as past cases, over the last few weeks. To help you sort through all the options, we've assembled a few statistics that are worth knowing up front. All of the iPod nano cases in this roundup run from $20 to $30, with most at $25 or less, while the two iPod classic cases sell for $25 to $30, iPod touch cases range from $20 to $30, and iPhone 3G cases go for $20 to $35. Virtually every case offers at least partial back and side protection, but they vary widely in front, top, and bottom coverage. Though all use plastic as their base material, they differ considerably in color options and secondary materials. This review looks at Griffin's highly similar Elan Form for iPod nano 4G and iPod touch 2G ($30 each), Nu Form for iPod touch 2G ($25), and Wave Cases for iPod nano 4G and iPod classic ($25 each).
All of these cases share the same basic design idea, borrowed from Incase’s Slider Case for the original iPhone: you get a two-piece plastic shell that slides apart low on the iPod’s body, rendering its bottom Dock Connector port compatible with any accessories that might be otherwise incompatible with the bottoms of the cases. As we’ve noted before, the idea was bright for the first iPhone because there actually was an accessory—Apple’s iPhone Dock—that required access to the bare bottom of that model, but it’s largely unnecessary for iPods, which generally fit without issues into the myriad Universal Dock accessories that are now available.
These slide-off bottoms, then, are an insurance policy against really oversized cases and plugs, but in our testing, you’re unlikely to actually need that feature for most accessories. It’s now mostly appealing as an easier way to get the iPod in and out of the case than using a fully open top, bottom, or face.
Nu Form for iPod touch 2G is the most basic implementation of the idea. The top half is semi-glossy gray plastic, with a collection of rounded squares floating in a pattern on the back left side, while the bottom is coated in soft touch black rubber; as with all of the products here, Griffin includes a screen protector and cleaning cloth in the package. While standard-sized headphone plugs and Dock Connector cables work just fine with holes in Nu Form’s bottom, oversized ones require you to pull the bottom off for connection. Universal Docks work with or without the bottom piece attached.
Elan Form for iPod touch is the exact same case, only with a thin layer of black leather coating both the top and bottom shells, and a $5 higher price tag. Our review sample’s leather was not precisely flattened in the corners, but generally looked pretty good anyway; it is no different in terms of accessory compatibility. The iPod nano 4G version sells for the same $30 price, and replaces the film screen protector with a hard plastic front shield. Once again, the leather wasn’t perfectly flattened in the corners, but it looked fine, and there was no need to pull the bottom off to use most accessories. In fact, the bottom here is compatible with every accessory we tested, including oversized headphone plugs and cables. All that’s missing from this case is Click Wheel, Hold switch, and full bottom protection for the nano; everything else is covered.
The real stars of this collection, in our view, are the $25 Wave Cases for iPod nano 4G and iPod classic, which though highly similar in concept are superior to the others in execution—some of the nicest cases we’ve seen for either of these iPod models. The iPod nano version is sold individually or in $35 two-packs, one translucent white or black, the other black or green, while the iPod classic version comes in a single translucent black version. Both use soft touch rubber on the outside, combined with a completely clear hard plastic face protector that’s held in place by the interlocking top and bottom halves. All that’s exposed, again, are the headphone and Dock Connector ports, Click Wheel, and Hold switch.
As with Griffin’s prior Wave designs, the design twist is a helix-like motif on the case, overlapping different colored shells, but here the waves are found on the back rather than the sides. We seriously love the way that these cases look in person; our only major gripe is that their face protectors are too easy to scratch, in some cases leaving streaks or blemishes that can be seen overlapping the iPods’ screens. Additionally, the iPod classic case’s headphone port hole looks generous, but doesn’t work with the very largest plugs we tested; it’s fine for most, not all. Both cases work with Universal Docks even if their bottoms are left in place.
Though different users’ tastes will obviously vary, the variations in price and materials between these otherwise similar, good designs weigh in certain models’ favor. Nu Form struck us as a plain but nicely protective design, slightly pricey for its quality, while Elan Form looked legitimately handsome as a hybrid plastic and leather case, but also felt a little expensive given that it wasn’t ideally executed, especially for the iPod nano. Wave, with its cool curves and overlapping colors, was the best executed of this bunch, offering identical protection at more reasonable pricing. It’s worthy of our high recommendation, while the others fall into the general recommendation category.
By Jeremy Horwitz
Editor-in-Chief, iLounge Published: Wednesday, October 22, 2008
Staggering is the only word we'd use to describe the number of hard plastic iPod and iPhone cases we're reviewing today -- over 20 different models that we've been comparing to one another, as well as past cases, over the last few weeks. To help you sort through all the options, we've assembled a few statistics that are worth knowing up front. All of the iPod nano cases in this roundup run from $20 to $30, with most at $25 or less, while the two iPod classic cases sell for $25 to $30, iPod touch cases range from $20 to $30, and iPhone 3G cases go for $20 to $35. Virtually every case offers at least partial back and side protection, but they vary widely in front, top, and bottom coverage. Though all use plastic as their base material, they differ considerably in color options and secondary materials. This review looks at Griffin's highly similar Elan Form for iPod nano 4G and iPod touch 2G ($30 each), Nu Form for iPod touch 2G ($25), and Wave Cases for iPod nano 4G and iPod classic ($25 each).
All of these cases share the same basic design idea, borrowed from Incase’s Slider Case for the original iPhone: you get a two-piece plastic shell that slides apart low on the iPod’s body, rendering its bottom Dock Connector port compatible with any accessories that might be otherwise incompatible with the bottoms of the cases. As we’ve noted before, the idea was bright for the first iPhone because there actually was an accessory—Apple’s iPhone Dock—that required access to the bare bottom of that model, but it’s largely unnecessary for iPods, which generally fit without issues into the myriad Universal Dock accessories that are now available.
These slide-off bottoms, then, are an insurance policy against really oversized cases and plugs, but in our testing, you’re unlikely to actually need that feature for most accessories. It’s now mostly appealing as an easier way to get the iPod in and out of the case than using a fully open top, bottom, or face.
Nu Form for iPod touch 2G is the most basic implementation of the idea. The top half is semi-glossy gray plastic, with a collection of rounded squares floating in a pattern on the back left side, while the bottom is coated in soft touch black rubber; as with all of the products here, Griffin includes a screen protector and cleaning cloth in the package. While standard-sized headphone plugs and Dock Connector cables work just fine with holes in Nu Form’s bottom, oversized ones require you to pull the bottom off for connection. Universal Docks work with or without the bottom piece attached.
Elan Form for iPod touch is the exact same case, only with a thin layer of black leather coating both the top and bottom shells, and a $5 higher price tag. Our review sample’s leather was not precisely flattened in the corners, but generally looked pretty good anyway; it is no different in terms of accessory compatibility. The iPod nano 4G version sells for the same $30 price, and replaces the film screen protector with a hard plastic front shield. Once again, the leather wasn’t perfectly flattened in the corners, but it looked fine, and there was no need to pull the bottom off to use most accessories. In fact, the bottom here is compatible with every accessory we tested, including oversized headphone plugs and cables. All that’s missing from this case is Click Wheel, Hold switch, and full bottom protection for the nano; everything else is covered.
The real stars of this collection, in our view, are the $25 Wave Cases for iPod nano 4G and iPod classic, which though highly similar in concept are superior to the others in execution—some of the nicest cases we’ve seen for either of these iPod models. The iPod nano version is sold individually or in $35 two-packs, one translucent white or black, the other black or green, while the iPod classic version comes in a single translucent black version. Both use soft touch rubber on the outside, combined with a completely clear hard plastic face protector that’s held in place by the interlocking top and bottom halves. All that’s exposed, again, are the headphone and Dock Connector ports, Click Wheel, and Hold switch.
As with Griffin’s prior Wave designs, the design twist is a helix-like motif on the case, overlapping different colored shells, but here the waves are found on the back rather than the sides. We seriously love the way that these cases look in person; our only major gripe is that their face protectors are too easy to scratch, in some cases leaving streaks or blemishes that can be seen overlapping the iPods’ screens. Additionally, the iPod classic case’s headphone port hole looks generous, but doesn’t work with the very largest plugs we tested; it’s fine for most, not all. Both cases work with Universal Docks even if their bottoms are left in place.
Though different users’ tastes will obviously vary, the variations in price and materials between these otherwise similar, good designs weigh in certain models’ favor. Nu Form struck us as a plain but nicely protective design, slightly pricey for its quality, while Elan Form looked legitimately handsome as a hybrid plastic and leather case, but also felt a little expensive given that it wasn’t ideally executed, especially for the iPod nano. Wave, with its cool curves and overlapping colors, was the best executed of this bunch, offering identical protection at more reasonable pricing. It’s worthy of our high recommendation, while the others fall into the general recommendation category.
By Jeremy Horwitz
Editor-in-Chief, iLounge Published: Wednesday, October 22, 2008
InvisibleSHIELD by ZAGG Review
CaseandCover.com reviews ZAGG’s invisibleSHIELD cases and covers for the iPhone, iPod, and BlackBerry. Trusted reviews, from trusted sources throughout the internet.
Everyone who owns expensive devices is always looking for a way to protect them. There is no shortage of cases, films and other protecting products out there, and each has its own benefits and downfalls. When Invisible Skinz reached out to me to take a look at the invisibleSHIELD
, I was happy take another look. I say another, because I have used these products in the past, as I had one for my Motorola Q back in 2006. At the time, I ended up having to send my phone back to Verizon, and forgot to remove the shield before sending. Fortunately, I am able to take another look.
In the Box
Invisible Shield
Install Squeegee
Shieldspray
Installation/Thoughts
Installing the invisibleSHIELD on your device takes about 30 minutes, but it’s worth the time. The secret for Zagg is the shield spray that they include with the shields. The formula interacts with the adhesive on the shield to make the installation process easier, and more effective. The actual installation process is simple; peel off the shield from the paper backing, spray, apply and squeegee. Each invisibleSHIELD is created specifically for the device its sold for, so the longest part of the installation is getting each little piece lined up perfectly. The result is full device coverage that looks incredibly professional. Out of all the devices I have, I thought the iPhone 3G would be a great representation as a test device for the product. The capacitive touch screen was my biggest concern, as I wondered if the screen would still be sensitive to my fingers. Good news, there is no noticeable difference in user experience on the screen.
I’ve had the invisibleSHIELD on my iPhone for the past week and have been happy with the results. The full body coverage gives me the peace of mind that I my phone is protected. The texture of the shield gives it a “grippy” feel, which makes it less prone to being dropped, and overall is a very unobtrusive solution to keeping your device protected.
About the Invisible Shield
ZAGG’s invisibleSHIELD™ is a thin polyurethane film originally created for the military to protect the leading edge of helicopter blades. What’s unique about this military-grade, patented film is how tough it is – it doesn’t scratch. What makes ZAGG’s exclusive invisibleSHIELD™ so strong, flexible and scratch-proof? Its Nano-Memory technology™. With this technology, it also allows it to curve and contour around an entire device (not just the screen) and adhere to the device unless you want to remove it (without leaving adhesive).
The invisibleSHIELD has been designed to protect over 2,500 handheld electronics, including the Apple iPod touch, the Apple iPhone 3G, the BlackBerry Curve and more.
from Mickey Papillion, 3/14/2009
Everyone who owns expensive devices is always looking for a way to protect them. There is no shortage of cases, films and other protecting products out there, and each has its own benefits and downfalls. When Invisible Skinz reached out to me to take a look at the invisibleSHIELD
In the Box
Invisible Shield
Install Squeegee
Shieldspray
Installation/Thoughts
Installing the invisibleSHIELD
I’ve had the invisibleSHIELD
About the Invisible Shield
ZAGG’s invisibleSHIELD
The invisibleSHIELD
from Mickey Papillion, 3/14/2009
DLO StrapWrap Review
CaseandCover.com reviews DLO cases and covers for the iPhone, iPod, and BlackBerry. Trusted reviews, from trusted sources throughout the internet.
by Dan Pourhadi, Macworld.com
Being a student of the collegiate order, as well as a guy who pretends to be a Chicago Loop business-type, I’m constantly carrying a bag to look like I’m on my way to something important (even if sometimes the bag is empty). My iPhone rests in my pocket, pumping tunes to my ears and effectively eliminating any idle communication with fellow public-transportation drones. But keeping it in my pocket is annoying and inconvenient—the iPhone is always bouncing around, clinking with my change from lunch, and extending my headphone wire the entire snag-attracting distance from my ear to my pants. Oh, and it makes my pocket bulge, too.
When I saw the box for the DLO StrapWrap , I let out a soft yelp: exactly what I needed, I thought. And after giving it a try, I was content with its functionality, and only mildly disappointed by its caveats.
The StrapWrap’s exterior is made from neoprene, making it reasonably resistant to the effects of wear-and-tear. It attaches to your shoulder bag or backpack using two adjustable Velcro flaps that wrap around any strap (up to 2.5 inches wide). A “stability clip” can clip to a buckle on your bag’s strap to keep the StrapWrap from sliding. Your gadget slides into one of two stretchy pouches on the front of the case, depending on the gadget’s size (gizmos up to 2.5 inches wide will fit) and how exposed you want it—one pouch offers more protection than the other. You can use the other pouch as a pocket for whatever you can manage to cram in there (for example, earbuds, ID, or credit cards).
The Good: The neoprene feels very durable, and the pouches constrict so tightly that there’s no way your gadget is slipping out accidentally. The Velcro flaps work well to secure the case to the strap—at least they did for my bags—with little slippage. And, of course, the convenience factor is a big plus.
The Bad: Because of its ‘one size fits all’ mentality, the StrapWrap is big, both in bulk and height. For messenger bags, that isn’t really an issue—there’s plenty of room across the chest. But for backpacks, the macho design—and particularly the height, considering that most backpack straps curve—can add a level of discomfort or general irritation that, for some, could be a deal-breaker.
In addition, while the “stability clip” can be useful, if your bag has no buckle or other appendage within reach, the clip becomes nothing more than a nuisance, and there’s no way to remove the long stability strap from the case. You end up either dealing with the swaying, bouncing fabric or shove the strap between the case flaps and your strap. And, of course, unlike bag-straps designed specifically for, say, an iPhone or iPod, there’s also no way to control the functions of your gadget without removing it from the StrapWrap first.
All-in-all, the StrapWrap is a decent bag-strap option, especially for people who may want to bring along different gadgets at different times, but it’s not without limitations.
by Dan Pourhadi, Macworld.com
Being a student of the collegiate order, as well as a guy who pretends to be a Chicago Loop business-type, I’m constantly carrying a bag to look like I’m on my way to something important (even if sometimes the bag is empty). My iPhone rests in my pocket, pumping tunes to my ears and effectively eliminating any idle communication with fellow public-transportation drones. But keeping it in my pocket is annoying and inconvenient—the iPhone is always bouncing around, clinking with my change from lunch, and extending my headphone wire the entire snag-attracting distance from my ear to my pants. Oh, and it makes my pocket bulge, too.
When I saw the box for the DLO StrapWrap , I let out a soft yelp: exactly what I needed, I thought. And after giving it a try, I was content with its functionality, and only mildly disappointed by its caveats.
The StrapWrap’s exterior is made from neoprene, making it reasonably resistant to the effects of wear-and-tear. It attaches to your shoulder bag or backpack using two adjustable Velcro flaps that wrap around any strap (up to 2.5 inches wide). A “stability clip” can clip to a buckle on your bag’s strap to keep the StrapWrap from sliding. Your gadget slides into one of two stretchy pouches on the front of the case, depending on the gadget’s size (gizmos up to 2.5 inches wide will fit) and how exposed you want it—one pouch offers more protection than the other. You can use the other pouch as a pocket for whatever you can manage to cram in there (for example, earbuds, ID, or credit cards).
The Good: The neoprene feels very durable, and the pouches constrict so tightly that there’s no way your gadget is slipping out accidentally. The Velcro flaps work well to secure the case to the strap—at least they did for my bags—with little slippage. And, of course, the convenience factor is a big plus.
The Bad: Because of its ‘one size fits all’ mentality, the StrapWrap is big, both in bulk and height. For messenger bags, that isn’t really an issue—there’s plenty of room across the chest. But for backpacks, the macho design—and particularly the height, considering that most backpack straps curve—can add a level of discomfort or general irritation that, for some, could be a deal-breaker.
In addition, while the “stability clip” can be useful, if your bag has no buckle or other appendage within reach, the clip becomes nothing more than a nuisance, and there’s no way to remove the long stability strap from the case. You end up either dealing with the swaying, bouncing fabric or shove the strap between the case flaps and your strap. And, of course, unlike bag-straps designed specifically for, say, an iPhone or iPod, there’s also no way to control the functions of your gadget without removing it from the StrapWrap first.
All-in-all, the StrapWrap is a decent bag-strap option, especially for people who may want to bring along different gadgets at different times, but it’s not without limitations.
Artwizz SeeJacket Leather for iPod classic Review
CaseandCover.com reviews Artwizz cases and covers for the iPhone, iPod, and BlackBerry. Trusted reviews, from trusted sources throughout the internet.
by Dan Pourhadi, Macworld.com
If your car-shopping criteria start with black exterior, black leather interior, and an abundance of that intoxicating new-car smell (while placing gas mileage and comfort towards the bottom of your priorities), Artwizz’s SeeJacket Leather for iPod classic is your kind of iPod case. Its leather coating is thick and exceptionally sturdy, with pressure-resistant panels that provide above-average protection against drops and bumps. The interior is a fabric so soft that the idea of case-caused scratching is laughable. It has an tight—perhaps too tight—belt-clip loop on the back, as well as a fixture for the included lanyard. Out of the box, it has a powerful odor reminiscent of, yes, new car leather. The case also comes with a clear-plastic stick-on screen protector to shield your iPod’s screen from the inevitable onslaught of dust and the constant threat of scratching.
Now that the flattery is out of the way, let’s take a look at the downsides (as in “you’ll be spending $80 every other day to fill up your empty gas tank”). The case is impressively constructed, except for one mind-boggling issue: To insert your iPod, you slide it through an opening…on the bottom of the case. And there’s no strap to keep your iPod from sliding out. That makes the belt-loop all but impractical, unless you wear the thing upside-down. Even if you don’t use the belt-loop, a wide-open bottom (or top, or side, for that matter) can definitely be a show-stopper. What good is a case if you’re constantly worried your iPod is going to slip out in your bag or pocket?
The opening weakens the case’s protection value, too, as the entire bottom edge of your iPod is vulnerable to damage from drops and scrapes. (Of course, the possibility of your iPod sliding out, even just a centimeter, adds an extra layer of risk that nixes the SeeJacket as an ideal choice for people looking for more than smooth leather and a distinctive smell.) (3 out of 5 stars)
by Dan Pourhadi, Macworld.com
If your car-shopping criteria start with black exterior, black leather interior, and an abundance of that intoxicating new-car smell (while placing gas mileage and comfort towards the bottom of your priorities), Artwizz’s SeeJacket Leather for iPod classic is your kind of iPod case. Its leather coating is thick and exceptionally sturdy, with pressure-resistant panels that provide above-average protection against drops and bumps. The interior is a fabric so soft that the idea of case-caused scratching is laughable. It has an tight—perhaps too tight—belt-clip loop on the back, as well as a fixture for the included lanyard. Out of the box, it has a powerful odor reminiscent of, yes, new car leather. The case also comes with a clear-plastic stick-on screen protector to shield your iPod’s screen from the inevitable onslaught of dust and the constant threat of scratching.
Now that the flattery is out of the way, let’s take a look at the downsides (as in “you’ll be spending $80 every other day to fill up your empty gas tank”). The case is impressively constructed, except for one mind-boggling issue: To insert your iPod, you slide it through an opening…on the bottom of the case. And there’s no strap to keep your iPod from sliding out. That makes the belt-loop all but impractical, unless you wear the thing upside-down. Even if you don’t use the belt-loop, a wide-open bottom (or top, or side, for that matter) can definitely be a show-stopper. What good is a case if you’re constantly worried your iPod is going to slip out in your bag or pocket?
The opening weakens the case’s protection value, too, as the entire bottom edge of your iPod is vulnerable to damage from drops and scrapes. (Of course, the possibility of your iPod sliding out, even just a centimeter, adds an extra layer of risk that nixes the SeeJacket as an ideal choice for people looking for more than smooth leather and a distinctive smell.) (3 out of 5 stars)